Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
637 Feature-Related System Parameters 
17
Must have an aca-halt button administered on the user’s station. If you enable 
this feature, complete the following ACA-related fields. 
ACA Referral Calls
Indicates where ACA referral calls generate. (Only appears when ACA Enabled 
is
y.)
ACA Referral Destination
The specified extension should be equipped with a display module. This field only 
appears if ACA Referral Calls is 
local or primary.
Valid entries Usage
y
 Enter y if ACA measurements will be taken.
n Otherwise, enter n.
Valid entries Usage
local
  Local referral calls generate on and for the local switch. 
primaryPrimary referral calls generate on the local switch for remote 
switches as well as the local switch. 
remoteRemote referral calls generate at another switch in a DCS 
network. In this case, the remote node number must also be 
entered. The remote node number is the same node number as 
defined on the Dial Plan screen. Also, ACA button status 
transmits to other switches when in a DCS network.
Valid entries Usage
An extension  Enter the extension on the local switch that is to receive the 
ACA referral call.
attdEnter attd for attendant. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
638 Feature-Related System Parameters 
17
ACA Short Holding Time Originating Extension 
and ACA Long Holding Time Originating 
Extension
ACA Remote PBX Identification
This field only appears if ACA Referral Calls is 
remote. 
Abbreviated Dial Programming by Assigned 
Lists
Auto Abbreviated/Delayed Transition Interval 
(rings)
Valid entries Usage
An unassigned 
extension Do not use the same extension number for both fields. The 
specified extensions are assigned automatically by the system 
when the screen is submitted. These fields only display if 
ACA Referral Calls is 
local or primary.
Valid entries Usage
1
–63Enter a number to identify the switch in a DCS network that 
makes the referral call. Do not define the remote switch 
identified in this field as 
local on the system’s Dial Plan screen.
Valid entries Usage
y
   Enter y to allow programming by station’s assigned list.
nEnter n  if using Program Access code to indicate which 
personal list is to be programmed.
Valid entries Usage
1
–16 Enter the number of rings before an automatic abbreviated/ 
delayed transition is triggered for a call 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
639 Feature-Related System Parameters 
17
Protocol for Caller ID Analog Terminals
Determines the protocol/tones sent to a Caller ID phone.
Field descriptions for page 2
Screen 86. Feature-Related System Parameters screen
Maximum Number of Messages Per Station 
(when MSA not in service)
Valid entries Usage
Bellcore
Enter Bellcore for Bellcore protocol with 212 modem protocol 
tones. Used in the U.S. and similar countries.
V23-Bell Enter V23-Bell for Bellcore protocol with V.23 modem tones. 
Used in Bahrain and similar countries.
Valid entries Usage
0–125
  The maximum number of LWC Messages that can be stored by 
the system for a telephone at a given time.
change system-parameters features   Page 2 of 9
                       FEATURE-RELATED SYSTEM PARAMETERS
LEAVE WORD CALLING PARAMETERS
  Maximum Number of Messages Per Station (when MSA not in service): 10_
Maximum Number of External Calls Logged Per Station: 0
Message Waiting Indication for External Calls? n
  Stations with System-wide Retrieval Permission (enter extension)
    1: 34430    3: attd_    5: _____    7: _____    9: _____
    2: 34412    4: _____    6: _____    8: _____   10: _____
WARNING!   SEE USER DOCUMENTATION BEFORE CHANGING TTI STATE
Terminal Translation Initialization (TTI) Enabled? y
TTI State: voice   TTI Security Code: _______
Record PSA/TTI Transactions in History Log? _
COR for PSA Dissociated Sets: _
CPN, ANI for PSA Dissociated Sets: _
Prohibit Bridging Onto Calls with Data Privacy? _
Enhanced Abbreviated Dial Length (3 or 4)? _
Default Multimedia Outgoing Trunk Parameter Selection: 2x64
WIRELESS PARAMETERS
Radio Controllers with Download Server Permission (enter board location)
1: ___ 2: ___ 3: ___ 4: ___ 5: ___ 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
640 Feature-Related System Parameters 
17
Maximum Number of External Calls Logged Per 
Station
When an external call is not answered, the switch keeps a record of up to 15 calls 
(provided information on the caller identification is available) and the phone’s 
message lamp lights. The phone set displays the names and numbers of 
unsuccessful callers.
Message Waiting Indication for External Calls
Provides a message waiting indication when external calls are logged.
Stations With System-wide Retrieval 
Permission (enter extension)
Terminal Translation Initialization (TTI) Enabled
Terminal Translation Initialization (TTI) must be enabled on the 
System-Parameters Customer-Options screen before the TTI fields can be 
administered.
Valid entries Usage
0 
- 15The maximum number of calls that can be logged for each user. 
The assigned number cannot be larger than the entry in the 
Maximum Number of Messages Per Station (when MSA not in 
service) field.
Valid entries Usage
y
The message waiting indication for a particular station is on 
whenever an external call is logged.
nThe log of external calls has no impact on the message waiting 
indication.
Valid entries Usage
An assigned station extension. Enter up to 10 telephone extension numbers 
that can retrieve LWC Messages for all other 
telephones. A VDN extension is not allowed 
attdAn entry of attd gives retrieval permission to 
all attendants. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
641 Feature-Related System Parameters 
17
!CAUTION:
Changing the TTI Enable field from 
n to y or from y to n triggers a 
background maintenance task that either generates (when changed to 
y) or 
removes (when changed to 
n) TTI port translation for unadministered ports 
in the system.
TTI State
The value of this field determines what type of TTI default port translation is 
generated for unadministered digital ports. This field appears when Terminal 
Translation Initialization (TTI) Enabled is 
y.
TTI Security Code
(This is also known as the TTI authorization code but is not the same as system 
authorization codes.) This field appears when Terminal Translation Initialization 
(TTI) Enabled is 
y.
Valid entries Usage
y
Enter y to start a background maintenance task to generate 
TTI port translations for unadministered ports on 
TTI-supported circuit packs.
n Enter n to remove existing TTI port translations and make sure 
no new TTI port translations will be generated.
Valid entries Usage
data
resume
Allows the TTI state to return to what it was before TTI was 
manually suspended.
suspendAllows any current generation or removal of TTI port 
translations to be halted and access to TTI will also be denied.
voice Enter voice for the Personal Station Access feature.
Valid entries Usage
1- to 7-digit code This is the code that TTI users must enter when 
accessing TTI from their telephones 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
642 Feature-Related System Parameters 
17
Record PSA/TTI Transactions in History Log
COR for PSA Dissociated Sets
CPN, ANI for PSA Dissociated Sets
Appears when the COR for PSA Dissociated Sets field is non-blank. Specifies the 
ISDN calling party number (CPN), R2-MFC ANI, and CAMA CESID applied to 
calls made from PSA dissociated sets, if no system-wide calling party information 
has been administered for those protocols on their respective administration 
screens.
Prohibit Bridging Onto Calls with Data Privacy
Enhanced Abbreviated Dial Length (3 or 4)
The administrator may not be able to use all entry slots because of system capacity 
constraints.
Valid entries Usage
y/n
 If y, TTI and PSA transactions record in the history log. You 
access these transactions via the List History command. 
Valid entries Usage
1-95
  Enter the class of restriction to apply to calls made from 
dissociated telephones. See ‘‘
Personal Station Access’’ on 
page 1458 for more information. 
Valid entries Usage
1-20 digits Enter the calling party number or automatic number 
identification for calls made from dissociated telephones.
Valid entries Usage
y/n
 Enter y to protect calls from bridge-on by any party, including 
Service Observing, Intrusion, Verify, and Bridging.
Valid entries Usage
3
A value of 3 makes 1000 Enhanced List entries available to the 
administrator
4A value of 4 makes 10,000 entries available. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
643 Feature-Related System Parameters 
17
Default Multimedia Outgoing Trunk Parameter 
Selection
Field descriptions for page 3
Screen 87. Feature-Related System Parameters screen 
Reserved Slots for Attendant Priority Queue
Valid entries Usage
2x56
Sets default parameter for bandwidth and bearer for all video 
calls.
2x64
Valid entries Usage
2
–75Enter the number of calls that can go in to the emergency queue
change system-parameters features   Page 3 of 10
                      FEATURE-RELATED SYSTEM PARAMETERS
                       Reserved Slots for Attendant Priority Queue: 5_
                                        Time Before Off-Hook Alert: 10__
                            Emergency Access Redirection Extension: _____
Number of Emergency Calls Allowed in Attendant Queue: __
                                              Call Pickup Alerting? n
Temporary Bridged Appearance on Call Pickup? y
Call Pickup on Intercom Calls? y
Directed Call Pickup? n
Extended Group Call Pickup: flexible
                 Deluxe Paging and Call Park Timeout to Originator? n
Controlled Outward Toll Restriction Intercept Treatment: tone _______
    Controlled Termination Restriction (Do Not Disturb): tone _______
              Controlled Station to Station Restriction: tone _______
AUTHORIZATION CODE PARAMETERS           Authorization Code Enabled? y
                                         Authorization Code Length: 7
                            Authorization Code Cancellation Symbol? #
                                           Attendant Time Out Flag? n
Display Authorization Code? _
Controlled Toll Restriction Replaces: station-station
          Controlled Toll Restriction Intercept Treatment: extension     3000 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
644 Feature-Related System Parameters 
17
Time Before Off-Hook Alert
Emergency Access Redirection Extension
Number of Emergency Calls Allowed in 
Attendant Queue
Call Pickup Alerting
This provides pickup group members with a visual indication on the Call Pickup 
status lamp of calls eligible to be answered via Call Pickup.
Temporary Bridged Appearance on Call Pickup
Valid entries Usage
1
 to 3000 seconds Enter the time in seconds that a telephone with an 
Off-Hook Alert Class of Service can remain off-hook 
(after intercept tone has started) before an emergency 
call is sent to the attendant.
Valid entries Usage
An assigned extension Enter the assigned extension number (can be a 
VDN) where emergency queue overflow will 
redirect.
Valid entries Usage
0
–75Enter the number of calls allowed in the attendant queue before 
additional calls are routed to the backup extension.
Valid entries Usage
y/n
 Enter y to enable Call Pickup Alerting on a system-wide basis.
Valid entries Usage
y
 Enter y to allow a temporary bridged appearance for calls 
answered with the Call Pickup or Directed Call Pickup features. 
This field controls this capability on a system-wide basis.
nEnter n to prevent the temporary bridged appearance of calls 
answered with these features. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
645 Feature-Related System Parameters 
17
Call Pickup on Intercom Calls
Directed Call Pickup
Feature use by individual stations, attendants, or EAS agents can be controlled by 
COR.
Extended Group Call Pickup
Enables call pickup groups to answer calls directed to another call pickup group.
Deluxe Paging and Call Park Timeout to 
Originator
Paged calls that are to be parked require separate activation of the Call Park 
feature. All parked calls that time out return to the attendant.
Valid entries Usage
y
 Enter y to allow a user’s or Agent LoginID’s call, ringing as an 
intercom call, to be picked up using the Call Pickup or Directed 
Call Pickup features. This field controls the use of this feature 
throughout the system.
nEnter n to prevent the use of these features to pickup an intercom 
call.
Valid entries Usage
y
Enter y to allow use of the Directed Call Pickup feature across 
the system.
n Enter n to prevent feature use.
Valid entries Usage
flexible
Flexible feature version supporting a one-to-n (pickup 
group-to-extended pickup group) mapping.
simpleSimple feature version with a one-to-one pickup 
group-to-extended pickup group mapping supported.
none Extended group call pickup not supported.
Valid entries Usage
y
Enter y to enable the Loudspeaker Paging - Deluxe feature that 
essentially integrates the Loudspeaker Paging and Call Park 
features. All parked calls that time out (not answered by paged 
party) return to the parking party.
n Enter n to enable the Loudspeaker Paging feature. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
646 Feature-Related System Parameters 
17
Controlled Outward Restriction Intercept 
Treatment
Enter the type of intercept treatment the caller receives when the call is outward 
restricted.
Controlled Termination Restriction (Do Not 
Disturb)
Enter the type of intercept treatment the caller receives when the call is placed to a 
termination restricted telephone.
Valid entries Usage
announcement
Provides a recorded announcement to calls that cannot be 
completed as dialed. You select and record the message.
The calling party receives no indication that the call is 
receiving Intercept Treatment.
Enter the extension number for the announcement in the 
associated field.
attendantAllows attendants to provide information and assistance to 
callers on all DID or incoming Private Network Access calls 
that cannot be completed as dialed or that are transferred to 
incomplete or restricted stations. Normal toll charges apply 
to these calls.
extension  Enter the extension number for the extension in an 
associated field. May not be a VDN extension.
tone  Provides a siren-type tone to internal calls that cannot be 
completed as dialed
Valid entries Usage
announcement
If announcement is entered, complete an associated 
extension number field.
attendantRedirects intercepted calls to the attendant. 
coverageRedirects intercepted calls to coverage. 
extensionIf extension is entered, complete an associated extension 
number field. May not be a VDN extension,
tone  Provides a siren-type tone to calls that cannot be completed 
as dialed.