Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
457 AAR and ARS Digit Conversion Table 
17
Location (for ARS only)
This is a display-only field. Values other than “all” appear only if the Multiple 
Locations field on the System Parameters Customer Options is y.
Percent Full
Displays the percentage (0 to 100) of the system’s memory resources that have 
been used by AAR/ARS. If the figure is close to 100%, you can free-up memory 
resources. 
Matching Pattern
Min
Max
Del
Valid display Usage
1
 to 44Defines the switch location for this ARS Digit Conversion Table.
allIndicates that this ARS Digit Conversion Table is the default for 
all port network (cabinet) locations.
Valid entries Usage
0
 to 9 
(1 to 18 digits)Enter the number you want the switch to match to dialed 
numbers. If a Prefix Digit 1 is required for 10-digit direct 
distance dialing (DDD) numbers, be sure the matching 
pattern begins with a 1. 
*, x, Xwildcard characters
Valid entries Usage
1
 to 24Enter the minimum number of user-dialed digits the 
system collects to match to this Matching Pattern.
Valid entries Usage
Min to 28Enter the maximum number of user-dialed digits the 
system collects to match to this Matching Pattern.
Valid entries Usage
0
 to Max Enter the number of digits you want the system to delete 
from the beginning of the dialed string. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
458 AAR and ARS Digit Conversion Table 
17
Replacement String
Net
Enter the switch network used to analyze the converted number.
Conv
ANI Req
This field applies only if the Request Incoming ANI (non-AAR/ARS) field on the 
Multifrequency-Signaling-Related System Parameters screen is 
n. Valid entries Usage
0
 to 9 
(1 to 18 digits)Enter the digits that replace the deleted portion of the dialed 
number. Leave this field blank to simply delete the digits.
*
#
Use # to indicate end-of-dialing. It must be at the end of the 
digit-string.
Valid entries Usage
ext, aar, ars
Analyze the converted digit-string as an extension number, an 
AAR address, or an ARS address.
Valid entries Usage
y
/nEnter y to allow additional digit conversion
Valid entries Usage
y
/nEnter y to require ANI on incoming R2-MFC or Russian MF 
ANI calls.
rAllowed only if the Allow ANI Restriction on AAR/ARS field 
is 
y on the Feature Related System Parameters screen. Use to 
drop a call on a Russian Shuttle trunk or Russian Rotary trunk 
if the ANI request fails. Other types of trunks treat 
r as y. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
459 Abbreviated Dialing List 
17
Abbreviated Dialing List
You use the Abbreviated Dialing List screens to establish system-wide or personal 
lists for speed dialing. 
Enhanced List
The Enhanced Abbreviated Dialing List can be accessed by users to place local, 
long-distance, and international calls; to activate/deactivate features; or to access 
remote computer equipment.
NOTE:
The Abbreviated Dialing Enhanced List field must be enabled on the 
System-Parameters Customer-Options screen before you can program an 
Enhanced List.
You can define only one Enhanced Abbreviated Dialing List in the system. Before 
you assign numbers to the list, you must define whether you want a 3-digit or 
4-digit enhanced list on the Feature-Related System Parameters
 screen. If you 
select 3-digit enhanced list, the list can be up to ten separate screens numbered 
from 0 through 9 that allow you to define up to 1000 numbers. If you select 4-digit 
enhanced list, the list can include up to 100 separate screens numbered 0 through 
99 that allow you to assign up to 10,000 numbers. 
If you want your attendants to use abbreviated dialing, you must also administer 
the Console Parameters
 screen.
Page 1
Screen 26. Abbreviated Dialing Enhanced List
See Abbreviated Dialing for a detailed description of the special characters.
display abbreviated-dialing enhanced                                Page 1 of 4
ABBREVIATED DIALING LIST
Enhanced List
                     Size (multiple of 5): 5 Privileged? n
DIAL CODE
      100: ________________________
      101: ________________________
      102: ________________________
      103: ________________________
      104: ________________________
      105: ________________________ 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
460 Abbreviated Dialing List 
17
Size (multiple of 5)
The number of dial code list entries you want in this list.
Privileged
Indicates whether users of this list can dial any number in the list, regardless of the 
COR of the station from which they dial.
DIAL CODE
Enter the number you want the system to dial when users enter this dial code. 
While the system is waiting, a call progress tone receiver is tied up, and, since 
there are a limited number of receivers in the system, outgoing calling capability 
may be impaired.
Vector Directory Number extension may also be assigned.
Group List
This screen implements the Abbreviated Dialing Group List. The Group Lists are 
controlled by the System Administrator. Up to 100 numbers can be entered per 
group list that can be accessed by users to place local, long-distance, and 
international calls; to activate/deactivate features; or to access remote computer 
equipment.
Valid entries Usage
5
 to 100, in multiples of 5 Up to 100 entries per screen
Valid entries Usage
y/n
  Set this field to n if you want the system to verify that this 
station is allowed to dial this number.
Valid entries Usage
Digits 0 to 9Up to 24 characters
* (star) Part of FAC
# (pound) Part of FAC
~pPause 1.5 seconds
~wWait for dial tone
~mChange to outpulse DTMF digits at the end-to-end rate
~sStart suppressing display of the digits being outpulsed
~WWait indefinitely for dial tone. Only use this if network 
response time is more than 30 seconds 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
461 Abbreviated Dialing List 
17
Field descriptions for page 1
Screen 27. Abbreviated Dialing Group List 
Group List
This is a display-only field when the screen is accessed using an administration 
command such as 
add or change.
Size (multiple of 5)
Enter the number of abbreviated dialing numbers you want to assign in multiples 
of 5, up to 100.
Program Ext
Enter the extension that you want to give permission to program the Group List.
Privileged
DIAL CODE
Enter the number you want the system to dial when users enter this dial code. 
While the system is waiting, a call progress tone receiver is tied up, and, since 
there are a limited number of receivers in the system, outgoing calling capability 
may be impaired.
Valid entries Usage
Display-only field Enter a group number when completing a paper screen.
Valid entries Usage
y
 If y is entered, the calling phone’s class of restriction (COR) is 
never checked and any number in the group list will be dialed. 
n If n is entered, the calling phone’s COR is checked to 
determine if the number can be dialed.
display abbreviated-dialing group                                   Page 1 of X
                            ABBREVIATED DIALING LIST
                               Group List: ____
Size (multiple of 5):  5  Program Ext: _____  Privileged? n
    DIAL CODE
01: ________________ 
02: ________________ 
03: ________________ 
04: ________________ 
05: ________________  
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
462 Abbreviated Dialing List 
17
Only DIAL CODEs 1 through 5 are displayed initially. If you enter a number 
greater than 5 in the Size field, the system increases the number of dial codes to 
the number you specified.
Vector Directory Number extension may also be assigned.
Personal List
This screen establishes a personal dialing list for phone/data module users. The 
personal list must first be assigned to the phone by the System Administrator 
before the phone user can add entries in the list. The lists can be accessed by users 
to place local, long-distance, and international calls; to activate/deactivate 
features; or to access remote computer equipment.
Screen 28. Abbreviated Dialing Personal List screen Valid entries Usage
Digits 0 to 9Up to 24 characters
* (star) Part of FAC
# (pound) Part of FAC
~pPause 1.5 seconds
~wWait for dial tone
~mChange to outpulse DTMF digits at the end-to-end rate
~sStart suppressing display of the digits being outpulsed
~WWait indefinitely for dial tone. Only use this if network 
response time is more than 30 seconds
display abbreviated-dialing personal   Page 1 of 4
ABBREVIATED DIALING LIST
Personal List: _____ List Number: ___
Size (multiple of 5): 5
DIAL CODE
01: ________________
02: ________________
03: ________________
04: ________________
05: ________________
06: ________________
07: ________________
08: ________________
09: ________________
00: ________________ 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
463 Abbreviated Dialing List 
17
Personal List
Enter the extension of the phone that will use this list.
List Number
Size (multiple of 5)
Enter the number of abbreviated dialing numbers you want to assign in multiples 
of 5, up to 100.
DIAL CODE
Enter the number you want the system to dial when users enter this dial code. 
While the system is waiting, a call progress tone receiver is tied up, and, since 
there are a limited number of receivers in the system, outgoing calling capability 
may be impaired.
Only DIAL CODEs 1 through 5 are displayed initially. If you enter a number 
greater than 5 in the Size field, the system increases the number of dial codes to 
the number you specified.
Vector Directory Number extension may also be assigned
Valid entries Usage
1
 to 3Identify which of the three personal lists you want to define for 
the phone.
Valid entries Usage
Digits 0 to 9Up to 24 characters
* (star) Part of FAC
# (pound) Part of FAC
~pPause 1.5 seconds
~wWait for dial tone
~mChange to outpulse DTMF digits at the end-to-end rate
~sStart suppressing display of the digits being outpulsed
~WWait indefinitely for dial tone. Only use this if network 
response time is more than 30 seconds 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
464 Abbreviated Dialing List 
17
System List
This screen implements a system abbreviated dialing list. Only one system list can 
be assigned and is administered by the System Administrator. The list can be 
accessed by users to place local, long-distance, and international calls; to 
activate/deactivate features; or to access remote computer equipment.
Page 1 of 4 of the screen
Screen 29. Abbreviated Dialing System List screen 
Size (multiple of 5)
Enter the number of abbreviated dialing numbers you want to assign in multiples 
of 5, up to 100.
Privileged
Valid entries Usage
y
Enter y if the originating party’s class of restriction (COR) is 
never checked and any number in the list can be dialed. 
nEnter n if the COR is to be checked to determine if the number 
can be dialed.
display abbreviated-dialing system                                  Page 1 of X
                               ABBREVIATED DIALING LIST
                                     System List
                      Size (multiple of 5): 5 Privileged? n
         DIAL CODE
01: ________________ 
02: ________________ 
03: ________________ 
04: ________________ 
05: ________________ 
06: ________________ 
07: ________________ 
08: ________________ 
09: ________________ 
10: ________________ 
11: ________________ 
12: ________________ 
13: ________________ 
14: ________________ 
15: ________________  
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
465 Abbreviated Dialing List 
17
DIAL CODE
Enter the number you want the system to dial when users enter this dial code. 
While the system is waiting, a call progress tone receiver is tied up, and, since 
there are a limited number of receivers in the system, outgoing calling capability 
may be impaired.
Only DIAL CODEs 1 through 5 are displayed initially. If you enter a number 
greater than 5 in the Size field, the system increases the number of dial codes to 
the number you specified.
Vector Directory Number extension may also be assigned.
7103A Button List
This screen assigns abbreviated dialing numbers to the 7103A phone buttons. The 
entries can then be accessed by 7103A phone users to place local, long-distance, 
and international calls; activate/deactivate features; or to access remote computer 
equipment. This screen applies only to 7103A fixed feature phones. Only one 
7103A abbreviated dialing list can be implemented in the system and it applies to 
all 7103A fixed feature phones in the system. This list is controlled by the System 
Administrator.
Valid entries Usage
Digits 0 to 9Up to 24 characters
* (star) Part of FAC
# (pound) Part of FAC
~pPause 1.5 seconds
~wWait for dial tone
~mChange to outpulse DTMF digits at the end-to-end rate
~sStart suppressing display of the digits being outpulsed
~WWait indefinitely for dial tone. Only use this if network 
response time is more than 30 seconds 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
466 Abbreviated Dialing List 
17
Pages 1 through 4 of the screen
Screen 30. Abbreviated Dialing List — 7103A Button List
DIAL CODE
Enter the number you want to assign to each dial code (button). Any additions or 
changes apply to all 7103A fixed feature phones. While the system is waiting, a 
call progress tone receiver is tied up, and, since there are a limited number of 
receivers in the system, outgoing calling capability may be impaired.
Vector Directory Number extension may also be assigned.
Valid entries Usage
Digits 0 to 9Up to 24 characters
* (star) Part of FAC
# (pound) Part of FAC
~pPause 1.5 seconds
~wWait for dial tone
~mMark
~sStart suppressing display of the digits being outpulsed
~WWait indefinitely for dial tone. Only use this if network 
response time is more than 30 seconds
display abbreviated-dialing 7103A-buttons                             Page 1 of 1
    ABBREVIATED DIALING LIST
    7103A Button List
      DIAL CODE (FOR THE 7103A STATION BUTTONS)
1: ________________________  5. ________________________
2: ________________________  6. ________________________
3: ________________________  7. ________________________
4: ________________________  8. ________________________