Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
947 System Parameters Customer-Options 
17
Request Feature
Allows the associated adjunct to request features such as change work modes, 
login, logout, sac, and fwd.
Set Value
Allows the adjunct to request status changes for Message Waiting lamps (that is, 
control of the on/off state of the lamps) and billing changes for 900-type call 
within Flexible Billing.
NOTE:
To request status changes to flexible billing, set Flexible Billing to y on page 
1 of the System-Parameters Customer-Options screen.
For CallVisor ASAI adjuncts, you can assign an alarm severity option to each of 
the following categories via the 
set options command:
nMajor on-board ASAI adjunct alarms
nMajor off-board ASAI adjunct alarms
nMinor on-board ASAI adjunct alarms
nMinor off-board ASAI adjunct alarms
See DEFINITY Enterprise Communications Server Maintenance for R7r, 
DEFINITY Enterprise Communications Server Maintenance for R7si, or 
DEFINITY Enterprise Communications Server Maintenance for R7csi for 
information on using the 
set options command.
For international Outbound Call Management applications, you may need to 
complete the System Parameters OCM Call Classification screen.
CallVisor ASAI Optional Features
In addition to ASAI capability groups on the System-Parameters 
Customer-Options screen there are ASAI optional features, which are described 
below. Except for Switch Classified Outbound Calls, all options default to 
n.
Answering Machine Detection
Used by the adjunct for predictive Outbound Call Management. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
948 System Parameters OCM Call Classification 
17
Selective Listening
Consists of two capabilities, Third Party Listen Disconnect and Third Party Listen 
Reconnect. Listen Disconnect allows the adjunct to disconnect selected listening 
paths on an active call. Listen Reconnect allows the adjunct to reconnect 
disconnected listening paths.
Switch Classified Outbound Calls
When you enable the CallVisor ASAI option(s), the following capabilities are 
automatically enabled, regardless of the groups selected: Value Query (includes 
Response Continued Capability), Abort, Heart Beat, Restart Procedure, 
Suspend/Resume Alarm.
NOTE:
You must logoff and login to effect the permission changes.
System Parameters OCM 
Call Classification
This screen enters the tone characteristics for your country for Outbound Call 
Management (OCM) applications. It is not required for United States OCM 
applications. If you cannot access this screen, contact your Lucent Technologies 
representative.
Field descriptions for page 1
Screen 198. System Parameters OCM Call Classification screenValid entries Usage
y
  Enable predictive dialing in the switch.
nDisable predictive dialing in the switch.
Page 1 of 2
 SYSTEM PARAMETERS OCM CALL CLASSIFICATION
TONE DETECTION PARAMETERS
Global Classifier Adjustment (dB): ___
USA Default Algorithm? _n
_
USA SIT Algorithm? ___ 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
949 System Parameters OCM Call Classification 
17
Global Classifier Adjustment (dB)
Enter a number to specify the dB loss adjustment.
USA Default Algorithm
USA SIT Algorithm
Field descriptions for page 2
Screen 199. System Parameters OCM Call Classification screenValid entries Usage
0
 to 15 0 is the least and 15 the most adjustment.
Valid entries Usage
y/n
To use the default United States tone detection, set this field to 
y. If you enter n, the US Special Information Tones (SIT) 
Algorithm field appears.
Valid entries Usage
y
To use the United States (SIT) tone characteristics for SIT tone 
detection.
nThe system treats tones with the administered tone name 
“intercept” as if they were SIT VACANT, and treats tones with 
the administered tone name “information” as if they were SIT 
UNKNOWN.
Page 2 of 9
SYSTEM PARAMETERS OCM CALL CLASSIFICATION
Tone Name Instance  Tone Cadence Duration Duration
Continuous Step Minimum Maximum
_________ _____ ___ 1. on _____ _____
2. off _____ _____
3. on _____ _____
4. off _____ _____
5. on _____ _____
6. off _____ _____
7. on _____ _____
8. off _____ _____ 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
950 System Parameters OCM Call Classification 
17
Tone Name
Instance
Enter the instance number of the tone. If the system identifies a tone that matches 
the characteristics defined on more than one page of this screen the system applies 
the tone definition from the earlier page.
Tone Continuous
Cadence Step
A display-only field identifying the number of each tone cadence step and 
indicating whether the tone is on or off during this cadence step.
Duration Minimum
Specifies the lower limit in milliseconds (msec) of the tone duration.
Valid entries Usage
busy
information
intercept
reorder
ringback
Enter the name of the tone that you are adding or 
modifying. This field is required for tone definition 
outside of the U.S. and Canada.
Valid entries Usage
1
–8The number distinguishes tones that have the same use but 
more than one definition of silence and tone-on 
characteristics. 
Valid entries Usage
y
Indicates a continuous tone. If you enter y, you cannot enter 
data in the Duration Minimum or Duration Maximum fields.
nIndicates a non-continuous tone.
Valid entries Usage
75
 – 6375Enter in increments of 25 msec. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
951 Telecommuting Access 
17
Duration Maximum
Specifies the upper limit in milliseconds of the tone duration.
NOTE:
On the Feature-Related System Parameters screen, set the Off-Premises 
Tone Detect Timeout Interval field to its maximum value.
Telecommuting Access 
This screen allows the System Administrator to administer the extension which 
allows remote users to use the feature.
Field descriptions for page 1
Screen 200. Telecommuting Access 
Telecommuting Access Extension
This only allows remote access to the Telecommuting Access feature.
Related Topics
Refer to ‘‘
Configuring DEFINITY ECS for telecommuting’’ on page 285 for 
information about setting up telecommuting.
Te n a n t  
This screen defines tenants to the system. If your switch uses tenant partitioning, 
you can 
Valid entries Usage
75
 – 6375Enter in increments of 25 msec.
Valid entries Usage
Unassigned 
extensionEnter an extension that conforms to your system’s dial plan and 
is not assigned to any other system object. 
add telecommuting-access
 TELECOMMUTING ACCESS
Telecommuting Access Extension: ____ 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
952 Tenant 
17
See ‘‘Tenant Partitioning’’ on page 1536 for more information. 
Field descriptions for page 1
Screen 201. Tenant 
Tenant
This is a display only field. It contains the tenant number that you entered on the 
command line.
Tenant Description
Attendant Group
This required information relates a tenant to an attendant group.
NOTE:
The default for the system is that all attendant groups exist. However, the 
attendant group will be empty if no consoles are assigned to it.
Valid entries Usage
40 alpha-numeric characters 
or blank You may leave the description field blank, but 
future administration will be easier if you provide 
descriptive information.
Valid entries Usage
1
–16. See DEFINITY ECS System Description, for your system’s 
range of allowable attendant group numbers.
change tenant 18 
                           Tenant 18
Tenant Description: ________________________________________
Attendant Group: 1
Ext Alert Port (TAAS): _______ Ext Alert (TAAS) Extension: ____
Night Destination: _____ 
 
Music Source: 1 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
953 Tenant 
17
Ext Alert Port (TAAS)
Ext Alert (TAAS) Extension
This field appears only if you entered an 
X in Ext Alert Port (TAAS). 
Night Destination
Music Source
Valid entries Usage
A valid port 
address or XEnter 7 character port number. Enter Trunk Answer Any Station 
(TAAS) alert port information, if any. The port type and the 
object type must be consistent, and the port can be assigned to 
only one tenant.
Valid entries Usage
A valid 
extensionIf you entered an X in Ext Alert Port (TAAS), you must enter 
extension information in this field.
Valid entries Usage
A valid 
extension Enter the night service station extension, if you want night 
service for this tenant.
Valid entries Usage
1
–20  Enter the music/tone source for this partition. These sources 
are defined on the Music Sources
 screen. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
954 Terminal Parameters 
17
Field descriptions for page 2
Screen 202. Tenant 
Tenant
This is a display only field. It contains the tenant number that you entered on the 
command line.
Calling permissions
The system default allows each tenant to call only itself and Tenant 1. If you want 
to change that, you can do that on this screen.
Terminal Parameters 
This screen administers system-level parameters and audio levels for the 603 
CALLMASTER telephones and the 6400-series, 8403, 8405B, 8405B+, 8405D, 
8405D+, 8410B, 8410D, 8411B, 8411D, and 8434D phones.
NOTE:
Only authorized Lucent Technologies personnel can administer this screen.
Valid entries Usage
y/n
Enter y to establish calling permission between the tenant 
number that you entered on the command line and any other 
tenant.
change tenant 18
                                   Tenant 18
CALLING PERMISSION (Enter y to grant permission to call specified Tenant)
 1? y    11? n    21? n    31? n    41? n    51? n    61? n    71? n    81? n    91? n
 2? n    12? n    22? n    32? n    42? n    52? n    62? n    72? n    82? n    92? n
 3? n    13? n    23? n    33? n    43? n    53? n    63? n    73? n    83? n    93? n
 4? n    14? n    24? n    34? n    44? n    54? n    64? n    74? n    84? n    94? n
 5? n    15? n    25? n    35? n    45? n    55? n    65? n    75? n    85? n    95? n
 6? n    16? n    26? n    36? n    46? n    56? n    66? n    76? n    86? n    96? n
 7? n    17? n    27? n    37? n    47? n    57? n    67? n    77? n    87? n    97? n
 8? n    18? y    28? n    38? n    48? n    58? n    68? n    78? n    88? n    98? n
 9? n    19? n    29? n    39? n    49? n    59? n    69? n    79? n    89? n    99? n
10? n    20? n    30? n    40? n    50? n    60? n    70? n    80? n    90? n   100? n 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
955 Terminal Parameters 
17
Screen 203. 8400-Series Terminal Parameters 
* This field appears only if Customize Parameters is y.
Screen 204. 603/302B1 Terminal Parameters 
change terminal-parameters 8400     Page 1 of 1
                            8400-TYPE TERMINAL PARAMETERS
   
          Default Parameter Set: __         Customize Parameters? _
   
   OPTIONS*
                   Display Mode: _*                DLI Voltage Level: _________*
       Handset Expander Enabled? _*
   
   PRIMARY LEVELS*
            Voice Transmit (dB): _____*          Voice Sidetone (dB): _____*
             Voice Receive (dB): _____*     Touch Tone Sidetone (dB): _____*
       Touch Tone Transmit (dB): _____*
   
   ADJUNCT LEVELS*+
            Voice Transmit (dB): _____*          Voice Receive (dB): _____*
            Voice Sidetone (dB): _____*    Touch Tone Sidetone (dB): _____*
   BUILT-IN SPEAKER LEVELS
            Voice Transmit (dB): _____*          Voice Receive (dB): _____*
                                           Touch Tone Sidetone (dB): _____*
   8403 BUILT-IN SPEAKER LEVELS
             Voice Receive (dB): _____*    Touch Tone Sidetone (dB): _____*
change terminal-parameters 302B1/603/606 Page 1 of 1
                           302B1/603/606 TERMINAL PARAMETERS
   
          Default Parameter Set: __             Customize Parameters? _
   
   OPTIONS*
                   Display Mode: _*                DLI Voltage Level: _________*
 
   
   PRIMARY LEVELS*
            Voice Transmit (dB): _____*          Voice Sidetone (dB): _____*
             Voice Receive (dB): _____*     Touch Tone Sidetone (dB): _____*
       Touch Tone Transmit (dB): _____*
   
  
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
956 Terminal Parameters 
17
Screen 205. 6400 Type Terminal Parameters 
Default Parameter Set
Determines which default set of telephone options and levels will be used. This 
field corresponds to the country codes. Refer to ‘‘
System Parameters 
Country-Options’’ on page 918 for the country code listing.
Customize Parameters
Indicates whether the administrator wishes to change one or more of the default 
parameters.
Valid entries Usage
y
If this field is y (yes), the OPTION and LEVEL fields appear 
and all fields can be edited.
nIf this field is n (no), the system uses all default parameters 
associated with the Default Parameter Set field and all fields 
are display-only.
change terminal-parameters 640/607A1 Page 1 of 1
     6400-TYPE TERMINAL PARAMETERS
      Default Parameter Set: 1 Customize Parameters? y
   
OPTIONS
     Display Mode:
     Handset Expander Enabled?
     Volume:
PRIMARY LEVELS
Voice Transmit (dB):     Voice Sidetone (dB):
Voice Receive (dB):     Touch Tone Sidetone (dB):
Touch Tone Transmit (dB):
BUILT-IN SPEAKER LEVELS
Voice Transmit (dB):      Voice Receive (dB):
    Touch Tone Sidetone (dB):
6402 BUILT-IN SPEAKER LEVELS
Voice Receive (dB):     Touch Tone Sidetone (dB):