Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Phone reference 
1117 8400-series telephones 
19
8434D telephone
The basic 8434 (8434D01A) and the enhanced 8434DX (8434D02A) telephones 
are multi-appearance digital telephones which offer 34 call appearance/feature 
buttons, each with a red light and a green status light, four standard fixed feature 
buttons (CONFERENCE, DROP, HOLD, and TRANSFER), a MUTE button, a 
SPEAKER button which accesses either a 2-way speakerphone or a 1-way 
listen-only speaker, a TEST button, a SHIFT button (some 8434DX telephones 
will have a RING button instead), a red Message light, personalized ringing, a 
built-in speakerphone with a reset option, and a built-in 2-line by 40-character 
VFD display. The 8434 and 8434DX also have five softkeys and four display 
control buttons which allow the user to access 15 features. These softkey features 
can be used in addition to the features on the call appearance/feature buttons.
The 8434 and 8434DX telephones can be used in both a 4-wire and a 2-wire 
environment. 
NOTE:
In order to use the display on the 8434 or 8434DX telephone and to use an 
801A expansion module connected to the 8434DX, you must connect an 
auxiliary power supply to the telephone.
You can connect an 801A Expansion Module to the 8434DX telephone to provide 
24 additional call appearance/feature buttons. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Phone reference 
1118 8400-series telephones 
19
Figure 44. 8403B telephone  Figure Notes
1. Handset
2. Dial pad3. 3 programmable buttons 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Phone reference 
1119 8400-series telephones 
19
Figure 45. 8410B telephone 
NOTE:
The 8405B and 8405B+ look like the 8410B with the exception that the 
8405 series do not have the second column of line appearances.
Figure Notes
1. Handset
2. Dial pad3. 10 programmable buttons 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Phone reference 
1120 8400-series telephones 
19
Figure 46. 8410D telephone 
NOTE:
The 8405D and 8405D+ look like the 8410D with the exception that the 
8405 series do not have the second column of line appearances.
Figure Notes
1. Handset
2. Dial pad3. 10 programmable buttons 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Phone reference 
1121 8400-series telephones 
19
Figure 47. 8434D telephone Figure Notes
1. Handset
2. Dial pad3. 10 programmable buttons
4. 24 feature buttons 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Phone reference 
1122 CALLMASTER telephones 
19
CALLMASTER telephones
There are several types of CALLMASTER telephones:
n602A and 602D CALLMASTER
The 602 CALLMASTER models have a display, a Message light, a Mute 
button, and four fixed feature buttons: Conference, Drop, Hold, and 
Transfer. You can administer its 10 call appearance/feature (2-lamp) 
buttons and its 17 feature-only (1-lamp) buttons.
n603D (CALLMASTER II)
The CALLMASTER II model has a display, a Message light, and the Mute, 
Select, Log In, and Release buttons. It also has four fixed features: 
Conference, Drop, Hold, and Transfer. You can administer its 6 call 
appearance/feature (2-lamp) buttons and its 15 feature-only (1-lamp) 
buttons. 
n603E (CALLMASTER III)
The CALLMASTER III model has a display, a Message light, and the 
Select, Mute, Log In, and Release buttons. It also has four fixed features: 
Conference, Drop, Hold, and Transfer. You can administer its 6 call 
appearance/feature (2-lamp) buttons and its 15 feature-only (1-lamp) 
buttons. Note that you can assign any feature to the Log In and Release 
buttons.
You can connect the CALLMASTER III to either a standard 4-wire DCP or 
a 2-wire circuit pack.
n603F (CALLMASTER IV)
The CALLMASTER IV model has a display, a Message light, and the 
Select, Mute, Log In, and Release buttons. It also has four fixed features: 
Conference, Drop, Hold, and Transfer. You can administer its 6 call 
appearance/feature (2-lamp) buttons and its 15 feature-only (1-lamp) 
buttons. Note that you can assign any feature to the Log In and Release 
buttons.
You can connect the CALLMASTER IV to either a standard 4-wire DCP 
or a 2-wire circuit pack.
n606A (CALLMASTER VI)
The CALLMASTER VI model is a miniature, 8-button, 2-headset jack, 
digital telephone that is controlled by the user’s personal computer (PC) 
through an RS-232 serial-port connection. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Phone reference 
1123 CALLMASTER telephones 
19
n607A (CALLMASTER V)
The CALLMASTER V model has a display, softkeys, and the display 
control buttons (Menu, Exit, Previous, and Next). This model does not 
have a standard handset, but you can connect a handset to one of its headset 
jacks. The CALLMASTER V has six fixed feature buttons: Speaker, Mute, 
Hold, Redial, Conference, and Transfer. You can administer its 16 call 
appearance/feature (2-lamp) buttons, however, one of these buttons must 
be administered as a Headset On/Off button and a second one must be 
administered as a Release button. You can also administer the 12 softkey 
buttons. 
Figure 48. CALLMASTER II/CALLMASTER III digital telephoneFigure Notes
1. Handset
2. Dial pad3. 6 programmable buttons
4. 18 feature buttons 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Phone reference 
1124 CALLMASTER telephones 
19
Figure 49. CALLMASTER IV digital telephone Figure Notes
1. Handset
2. Dial pad3. 6 programmable buttons
4. 15 feature buttons
3DEF1
4GHI
7PRQS
6MNO
9WXYZ
2ABC
5JKL
8TUV
0
CALLMASTER IV
MuteLog In
Release
SelectVolumeConference
RingTransfer
Drop
Te s tHold(1)
(4)
(F1)
(F2)
(F3)
(F4)
(F5)(2)
(5)
(F7)
(F8)
(F9)
(F10)
(F11)(3)
(6)
(F13)
(F14)
(F15)
(F16)
(F17)1
2
2
2
2
3
4
phdfclms EWS 030999 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Phone reference 
1125 CALLMASTER telephones 
19
Figure 50. CALLMASTER V digital telephone Figure Notes
1. Dial pad
2. Display3. 4 softkey buttons
4. 16 call appearance/feature buttons
7PQRS
3DEF
SpeakerMuteHold
RedialTransferTes t
Ring
2ABC1
4GHI
*
56
8
9MNO JKL
TUV
WXYZ
O#
Vo l u m e
Te l  #
CALLMASTER V4
Menu Exit Prev Next
Conf
2
3
1 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Phone reference 
1126 Cordless telephones 
19
Cordless telephones
MDC9000 cordless telephone
The MDC 9000 Cordless Telephone has two basic parts, the handset and the 
charging base.
nThe handset has line/programmable feature/intercom buttons, Conference, 
Drop, Hold, Transfer, Status, and Feature buttons, Headset On/Off and 
Handset On/Off buttons, a LCD display, an earpiece volume control 
switch, battery charging contacts, a directory card, and a headset jack.
nThe charging base has a handset hook, ringer volume controls, battery 
charging contacts, a Talk indicator, a Charge indicator, a Message indicator, 
and a base ringer.
MDW9000 cordless telephone
The MDW 9000 Wireless Telephone is part of the TransTalk
™ 9000 Digital 
Wireless System family of telephones. This wireless telephone has three basic 
parts, the handset the charging cradle, and the radio module.
nThe handset has line/programmable feature/intercom buttons, Drop, Mute, 
Hold, Conference, and Transfer buttons, a Headset On/Off button and a 
Handset On/Off button, a LCD display, a Volume control switch, battery 
charging contacts, a flexible antenna, and a Headset jack.
nThe charging cradle has a handset hook, a spare battery cover, a spare 
battery.
nThe radio module has Power, Pass, and Radio indicator lights, a top hook, 
card edge, and snap lock which connect the radio module to the carrier 
assembly/backplane, an antenna, and power plug and line connectors.