Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
937 System Parameters Country-Options 
17
End-to-End total loss (dB) in a n-party 
conference
Provides total loss for a conference call with the designated number of parties.
FROM / TO
Identifies the variable digital tone values.
Field descriptions for pages 4–7
Screen 192. System Parameters Country-OptionsValid entries Usage
0 
- 99The higher the number listed for a call with a fixed display 
number of parties, the more loss the switch adds into a 
conference call with that number of parties; therefore, the 
conference call is quieter.
Valid entries Usage
-3 
- 15An unsigned number is a loss, while a number preceded with 
a minus sign is a gain.
change system-parameters country-options                       Page 4 of 7
                       SYSTEM PARAMETERS COUNTRY-OPTIONS
         Tone Name     Cadence       Tone
                        Step    (Frequency/Level)
      busy____________    1:      440/-17.25___   Duration (msec): 200__
                          2:      silence______   Duration (msec): 200__
                          3:      440/-17.25___   Duration (msec): 200__
                          4:      silence______   Duration (msec): 200__
                          5:      440/-17.25___   Duration (msec): 200__
                          6:      goto_________              step: 3_
                          7:      _____________
                          8:      _____________
                          9:      _____________
                         10:      _____________
                         11:      _____________
                         12:      _____________
                         13:      _____________
                         14:      _____________
                         15:      _____________ 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
938 System Parameters Country-Options 
17
Tone Name
Each entry uses one of the keywords below to indicate which of the individually 
administrable tones this screen modifies. This field (with its associated Tone 
(Frequency/Level), Duration, and Step fields) is meaningful only if the system 
tone detector is a TN780, vintage 4 or greater, or a TN2182.
Cadence Step
Valid entries Usage
blank   If this field is blank, all entries in the corresponding 
Frequency and Duration fields are ignored.
1-call-wait
2-call-wait
3-call-wait
busy
busy-verify
call-wait-ringback
conference
confirmation
disable-dial
hold
hold-recall
immed-ringback
intercept
intrusion
PBX-dial
recall-dial
recall-dont-ans
redirect
reorder
rep-confirmation
reset-shift
ringback
secondary-dial
special-dial
whisper-page
zip
Valid entries Usage
1–15
Identifies the number of each tone cadence step. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
939 System Parameters Country-Options 
17
Tone (Frequency/Level)
Valid entries Usage
silence
An entry of silence means no tone. A final step of silence 
with an infinite duration will be added internally to any tone 
sequence that does not end in a 
goto.
gotoAn entry of goto means to repeat all or part of the sequence, 
beginning at the specified cadence step.
350/-17.25
350+425/-4.0
350+440/-13.75
375+425/-15.0
404/-11.0
404/-16.0
404+425/-11.0
404+450/-11.0
425/-4.0
425/-11.0
425/-17.25
440/-17.25
440+480/-19.0
450/-10
480/-17.25
480+620/-24.0
525/-11.0
620/-17.25
697/-8.5
770/-8.5
852/-8.5
941/-8.5
1000/0.0
1000/+3.0
1004/0.0
1004/-16.0
1209/-7.5
1336/-7.5
1400/-11.0
1477/-7.5
1633/-7.5
2025/-12.1
2100/-12.1
2225/-12.1
2804/-16.0Specifies the frequency and level of the tone. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
940 System Parameters Customer-Options 
17
Duration (msec)
There is one dynamic Duration field associated with each of the 15 Tone 
(Frequency/Level) fields on each screen page. Initially, when Tone is blank, this 
field does not appear. However, when a non-blank value other than 
goto is 
entered in a Tone field, the associated Duration field appears, and must be used to 
specify the duration (in milliseconds) of the specified tone.
Step
There is one dynamic Step field associated with each of the 15 Tone 
(Frequency/Level) fields shown on a screen page. Initially, when Tone is blank, 
this field does not appear. However, when 
goto is entered in a Tone field, the 
associated Step field appears, and must be used to specify the cadence step to 
begin repeating from
System Parameters 
Customer-Options
This screen allows access to features purchased by customers. An authorized 
Lucent Technologies representative sets these parameters for you.
Field descriptions for page 1
Screen 193. System Parameters Customer-Options Valid entries Usage
50
 through 12750 in 
increments of 50To describe the duration of each administered tone.
Valid entries Usage
Cadence Step (1–14)  Beginning the repeated sequence for a “goto” entry.
  Page   1 of   5
OPTIONAL FEATURES
                  G3 Version: V6  Maximum Ports:  300
Abbreviated Dialing Enhanced List? n CAS Main? n
 Access Security Gateway? n Cvg Of Calls Redirected Off-net? n
Analog Trunk Incoming Call ID? n  DCS (Basic)? n
 A/D Grp/Sys List Dialing Start at 01? n  DCS Call Coverage? n
Answer Supervision by Call Classifier? n DCS with Rerouting? n
                                  ARS? y DEFINITY Network Admin? n
ARS/AAR Partitioning? y  DS1 MSP? n
    ASAI Interface? n
ASAI Proprietary Adjunct Links? n Emergency Access to Attendant? y  Page   1 of   5
OPTIONAL FEATURES
                  G3 Version: V8  Maximum Ports: 100 
Location: 1  Maximum XMOBILE Stations: 0
Maximum H.323 Trunks: 0
Maximum H.323 Stations: 0
Maximum IP SoftPhones: 0 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
941 System Parameters Customer-Options 
17
G3 Version
Identifies the version of DEFINITY ECS being used. 
Maximum Ports
Number of ports active, per contract.
Location
Indicates the location of this switch. 1 indicates Canada or the United States. 2 
indicates any other location, and allows the use of International Consolidation 
circuit packs and telephones.
Maximum XMOBILE Stations
Specifies the maximum number of allowable XMOBILE stations. In general, each 
XMOBILE station is assigned to a wireless handset.
Maximum H.323 Trunks
Appears when the H.323 Trunks field is 
y. Specifies the maximum number of 
H.323 trunks that may be administered.
Maximum H.323 Stations
Appears when the IP Stations field is 
y. Specifies the maximum number of H.323 
stations that may be administered.
Valid entries Usage
0 
- 36065 (G3r)
0 - 3500 
(G3vs/si/csi)Shows the maximum number of XMOBILE stations. Each 
XMOBILE station counts as a station and a port in terms of 
system configuration.
Valid entries Usage
0 
- 1000 (G3r)
0 - 300 
(G3si/csi)Shows the maximum number of H.323 trunks. The combined 
total of H.323 stations, IP SoftPhones, and H.323 trunks cannot 
exceed 1000 for G3r or 300 for G3si/csi.
Valid entries Usage
0 
- 1000 (G3r)
0 - 300 
(G3si/csi)Shows the maximum number of H.323 stations. The combined 
total of H.323 stations, IP SoftPhones, and H.323 trunks cannot 
exceed 1000 for G3r or 300 for G3si/csi. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
942 System Parameters Customer-Options 
17
Maximum IP SoftPhones
Appears when the IP Stations field is 
y. Specifies the maximum number of IP 
SoftPhone stations that may be administered.
Field descriptions for page 2
Screen 194. System Parameters Customer-Options 
Abbreviated Dialing Enhanced List
Provides the capability to store and retrieve dialing lists that simplify or eliminate 
dialing. You dial an abbreviated code or depress an assigned button. The stored 
entries are organized in number lists. There are three types of number lists: 
personal, group, and enhanced.
Access Security Gateway (ASG)
Provides an additional level of security for remote administration of the switch.
Valid entries Usage
0 
- 1000 (G3r)
0 - 300 
(G3si/csi)Shows the maximum number of IP SoftPhone stations. The 
combined total of H.323 stations, IP SoftPhones, and H.323 
trunks cannot exceed 1000 for G3r or 300 for G3si/csi.
  Page   1 of   5
OPTIONAL FEATURES
                  G3 Version: V6  Maximum Ports:  300
Abbreviated Dialing Enhanced List? n CAS Main? n
 Access Security Gateway? n Cvg Of Calls Redirected Off-net? n
Analog Trunk Incoming Call ID? n  DCS (Basic)? n
 A/D Grp/Sys List Dialing Start at 01? n  DCS Call Coverage? n
Answer Supervision by Call Classifier? n DCS with Rerouting? n
                                  ARS? y DEFINITY Network Admin? n
ARS/AAR Partitioning? y  DS1 MSP? n
    ASAI Interface? n
ASAI Proprietary Adjunct Links? n Emergency Access to Attendant? y
Async. Transfer Mode (ATM) PNC? n  Extended Cvg/Fwd Admin? n
Async. Transfer Mode (ATM) Trunking? n External Device Alarm Admin? n
ATMS? n Flexible Billing? n
Audible Message Waiting? n Forced Entry of Account Codes? n
Authorization Codes? n Global Call Classification? n
  CAS Branch? n Hospitality (Basic)? y  Page 2 of 6
OPTIONAL FEATURES
Abbreviated Dialing Enhanced List? n CAS Branch? n
 Access Security Gateway (ASG)? n   CAS Main? n
Analog Trunk Incoming Call ID? n          Change COR by FAC? n
 A/D Grp/Sys List Dialing Start at 01? n Cvg Of Calls Redirected Off-net? n
Answer Supervision by Call Classifier? n                DCS (Basic)? n
                     ARS? y           DCS Call Coverage? n
                 ARS/AAR Partitioning? y               DCS with Rerouting? n
ARS/AAR Shortcut Dialing? n          DEFINITY Network Admin? n
                       ASAI Interface? n  Digital Loss Plan Modification? n
      ASAI Proprietary Adjunct Links? n              DS1 MSP? n
  Async. Transfer Mode (ATM) PNC? n Emergency Access to Attendant? y
Aync. Transfer Mode (ATM) Trunking? n    Extended Cvg/Fwd Admin? n
                         ATMS? n      External Device Alarm Admin? n
   Attendant Vectoring? n     Flexible Billing? n
     Audible Message Waiting? n   Forced Entry of Account Codes? n
      Authorization Codes? n     Global Call Classification? n 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
943 System Parameters Customer-Options 
17
A/D Grp/Sys List Dialing Start at 01
Allows you to number Abbreviated Dialing group or system lists starting with 01, 
rather than simply 1. This allows DEFINITY ECS Abbreviated Dialing to operate 
like it does with the DEFINITY G2 system.
Analog Trunk Incoming Call ID
This field allows collection and display the name and number of an incoming call 
information on analog trunks. 
Answer Supervision by Call Classifier
This circuit pack detects tones and voice-frequency signals on the line and 
determines whether a call has been answered. This field is set to 
y if the system 
contains a call-classifier circuit pack.
ARS
Provides access to public and private communications networks. Long-distance 
calls can be routed over the best available and most economical routes. Provides 
partitioning of ARS routing patterns.
ARS/AAR Partitioning
Provides the ability to partition AAR and ARS into 8 user groups within a single 
DEFINITY ECS. Can establish individual routing treatment for each group.
ARS/AAR Shortcut Dialing
Provides for making Automatic Alternate Routing (AAR) and Automatic Route 
Selection (ARS) calls without dialing a Feature Access Code (FAC).
ASAI Interface
Provides linkage between DEFINITY ECS and adjuncts. CallVisor ASAI 
improves the call handling efficiency of ACD agents and other system users by 
allowing an adjunct to monitor, initiate, control, and terminate calls on the switch.
ASAI Proprietary Adjunct Links
Provides linkage between DEFINITY ECS and adjuncts. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
944 System Parameters Customer-Options 
17
Asynch. Transfer Mode (ATM) PNC
With this configuration, the processor port network (PPN) is to be connected to 
expansion port networks (EPNs) via an ATM switch.
Asynch. Transfer Mode (ATM) Trunking
With this configuration, multiple ISDN-PRI T1 or E1 trunks can be emulated on 
one ATM pipe. Can only be enabled if the ISDN-PRI field is set to 
y. Enables 
circuit emulation service (CES).
AT M S
Provides for voice and data trunk facilities to be measured for satisfactory 
transmission performance.
Audible Message Waiting
Provides audible message waiting.
Authorization Codes
Permits you to selectively specify levels of calling privileges that override 
in-place restrictions. In addition to facilities access, authorization codes are used 
for unique identification for billing security purposes.
CAS Branch
Provides Centralized Attendant Service - Branch. See CAS Main for more 
information.
Valid entries Usage
y
Set this field to y to enable port network connectivity (PNC).
ATM PNC can be enabled (this field accepts a 
y) only if:
— all prior fiber-link administration has been removed
— all “switch-node” and “dup-switch-node” carrier types 
have been removed
nOnce ATM PNC is enabled, it can be disabled (this field 
accepts an 
n) only if all atm pnc connections have been 
removed. 
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
945 System Parameters Customer-Options 
17
CAS Main
Provides multi-location switch customers served by separate switching vehicles to 
concentrate attendant positions at a single main DEFINITY ECS location. The 
main DEFINITY ECS is served by an attendant queue that collects calls from all 
locations (main and branch). Each branch location switches all of its incoming 
calls to the centralized attendant positions over release link trunks (RLTs). The 
calls are then extended back to the requested extension at the branch switch over 
the same RLT. When the call is answered, the trunks to the main switch are 
dropped and can be used for another call.
Change COR by FAC
Provides certain users the ability to change the class of restriction of local 
extensions and local attendants via a phone by using a feature access code (FAC).
Cvg Of Calls Redirected Off-net
Provides continued monitoring for calls redirected to off-network (remote) 
coverage points. Uses call classification via call classifier circuit pack or ISDN 
trunk signaling. 
DCS (Basic)
Provides transparent operation of selected features across a Distributed 
Communications System (DCS). Users on one switch can use features located on 
another switch. Includes 4- and 5-digit uniform dialing and 1–4 digit steering.
DCS Call Coverage 
Provides DCS-based transparency of the call coverage feature across a DCS 
network of switches.
DCS with Rerouting
Provides for rerouting calls transferred among DCS nodes, enabling rerouting of 
the call for more effective use of facilities.
Valid entries Usage
y
To invoke DCS with Rerouting
Valid entries Usage
y
To set value to y, enable ISDN-PRI (on page 2) and DCS 
(Basic).
n  
						

							DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Screen reference 
946 System Parameters Customer-Options 
17
DEFINITY Network Admin
Indicates the switch is accessible by DEFINITY Network Administration.
Digital Loss Plan Modification
Allows you to customize the digital loss and digital tone plans.
DS1 MSP
Provides the ability to change fields on DS1 circuit pack screen without removing 
the related translations of all trunks from the trunk group.
Emergency Access to Attendant 
Provides for emergency calls to be placed to an attendant. These calls can be 
placed automatically by DEFINITY ECS or dialed by users.
Extended Cvg/Fwd Admin
Provides basic telecommuting package capability for Extended User 
Administration of Redirected Calls.
External Device Alarm Admin
Provides for analog line ports to be used for external alarm interfaces. Allows 
identification of port location, adjunct associated with port location, and the alarm 
level to report.
Flexible Billing
Provides an internationally accepted standard interface for end-to-end digital 
connectivity. Used with a T1 interface and supports twenty-three 64-KBPS voice 
or data B-Channels and one 64-Kbps signaling D Channel for total bandwidth of 
1.544 Mbps.
Valid entries Usage
y
Allows you to make specific changes.
nUses the default country code for the loss plan, tone plan, and 
conference loss plan. No modifications to the loss plan are 
permitted.